Cisco ACE-4710-K9 Administration Guide - Page 78

Configuring Remote Network Management Traffic Services Chapter 2 Enabling Remote Access to the ACE To remove a policy map from the ACE, enter: host1/Admin(config)# no policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY Defining a Layer 3 and Layer 4 Policy Map Description To provide a brief summary about the Layer 3 and Layer 4 remote management policy map, use the description command in policy map configuration mode. The syntax of this command is as follows: description text The text argument specifies the description that you want to provide. Enter an unquoted text string with a maximum of 240 alphanumeric characters. For example, to specify a description that the policy map is to allow remote Telnet access, enter: host1/Admin(config-pmap-mgmt)# description Allow Telnet access to the ACE To remove a description from the policy map, enter: host1/Admin(config-pmap-mgmt)# no description Specifying a Layer 3 and Layer 4 Traffic Class With the Traffic Policy To specify a Layer 3 and Layer 4 traffic class created with the class-map command to associate network traffic with the traffic policy, use the class command in policy map configuration mode. This command enters the policy map management class configuration mode. The syntax of this command is as follows: class {name1 [insert-before name2] | class-default} 2-10 Cisco 4700 Series Application Control Engine Appliance Administration Guide OL-11157-01