Cisco ACE-4710-K9 Administration Guide - Page 185
Viewing Class Maps, Policy Maps, and Service Policies, Displaying Class Map Configuration Information
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Chapter 4 Configuring Class Maps and Policy Maps Viewing Class Maps, Policy Maps, and Service Policies Viewing Class Maps, Policy Maps, and Service Policies The ACE CLI provides a comprehensive set of show commands that display the class map, policy map, and service policy configuration. This section contains the following topics: • Displaying Class Map Configuration Information • Displaying Policy Map Configuration Information • Displaying Service Policy Configuration Information Displaying Class Map Configuration Information To display the class map configurations in the ACE, use the show running-config class-map command in Exec mode. For example, enter: host1/Admin# show running-config class-map Generating configuration.... class-map type management match-any Mgmt_allow_class 10 match protocol telnet source-address 172.16.1.2 255.255.255.254 20 match protocol ssh source-address 172.16.1.2 255.255.255.254 class-map type http loadbalance match-any L4_SLB_class Displaying Policy Map Configuration Information To display the policy map configurations in the ACE, use the show running-config policy-map command in Exec mode. For example, enter: host1/Admin# show running-config policy-map Generating configuration.... policy-map type management first-match REMOTE_MGMT_ALLOW class SSH-ALLOW permit class TELNET-ALLOW permit policy-map type loadbalance first-match L4_SLB_policy class L4_SLB_class OL-11157-01 Cisco 4700 Series Application Control Engine Appliance Administration Guide 4-71