Cisco ACE-4710-K9 Administration Guide - Page 51
show ntp peers, show ntp statistics io, Peer IP Address
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 1 Setting Up the ACE Synchronizing the ACE with an NTP Server Table 1-2 Field Descriptions for the show ntp peer-status Command Field Peer IP Address Serv/Peer Description IP address of each associated peer Indication of whether the peer functions as an NTP server or NTP peer For example, to display a summary of all peers, enter: switch/Admin# show ntp peers Table 1-3 describes the fields in the show ntp peers command output. Table 1-3 Field Descriptions for the show ntp peers Command Field Peer IP Address Serv/Peer Description The IP address of each associated peer Indicates whether the peer functions as an NTP server or NTP peer For example, to display the NTP input/output statistics, enter: switch/Admin# show ntp statistics io Table 1-4 describes the fields in the show ntp statistics io command output. Table 1-4 Field Descriptions for show ntp statistics io Command Field Time since reset Receive buffers Free receive buffers Used receive buffers Low water refills Description Time since the last reset of the NTP software on the primary server Total number of UDP client-receive buffers Current number of available client-receive buffers Current number of unavailable client-receive buffers Total number of times buffers were added, which also indicates the number of times there have been low memory resources during buffer creation OL-11157-01 Cisco 4700 Series Application Control Engine Appliance Administration Guide 1-25