Cisco ACE-4710-K9 Administration Guide - Page 350
Defining a Class Map Description, Defining SNMP Protocol Match Criteria
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
Configuring SNMP Management Traffic Services Chapter 8 Configuring SNMP The CLI displays the class map management configuration mode. To classify the remote SNMP protocol management traffic received by the ACE, include one or more of the associated commands to configure the match criteria for the class map: • description-See the "Defining a Class Map Description" section • match protocol-See the "Defining SNMP Protocol Match Criteria" section You may include multiple match protocol commands in a class map. For example, to allow SNMP access between the ACE and the host located at IP address 192.168.1.1 255.255.255.0, enter: host1/Admin(config)# class-map type management match-all SNMP-ALLOW_CLASS host1/Admin(config-cmap-mgmt)# match protocol snmp source-address 192.168.1.1 255.255.255.0 host1/Admin(config-cmap-mgmt)# exit To remove a Layer 3 and Layer 4 SNMP protocol management class map from the ACE, enter: host1/Admin(config)# no class-map type management match-all SNMP-ALLOW_CLASS Defining a Class Map Description Use the description command to provide a brief summary about the Layer 3 and Layer 4 remote management class map. Access the class map management configuration mode to specify the description command. The syntax of this command is as follows: description text Use the text argument to enter an unquoted text string with a maximum of 240 alphanumeric characters. 8-40 Cisco 4700 Series Application Control Engine Appliance Administration Guide OL-11157-01