Cisco ACE-4710-K9 Administration Guide - Page 385
For example, to specify an interface VLAN and apply an XML HTTPS
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 385 highlights
Chapter 9 Configuring the XML Interface Configuring HTTP and HTTPS Management Traffic Services REVIEW DRAFT - CISCO CONFIDENTIAL The syntax of this command is: service-policy input policy_name The keywords, arguments, and options are: • input-Specifies that the traffic policy is to be attached to the input direction of an interface. The traffic policy evaluates all traffic received by that interface. • policy_name-Name of a previously defined policy map, configured with a previously created policy-map command. The name can be a maximum of 40 alphanumeric characters. For example, to specify an interface VLAN and apply an XML HTTPS management policy to the VLAN, enter: host1/Admin(config)# interface vlan 50 host1/Admin(config-if)# ip address 192.168.10.1 255.255.0.0 host1/Admin(config-if)# service-policy input MGMT_XML-HTTPS_POLICY For example, to globally apply an XML HTTPS management policy to all of the VLANs associated with a context, enter: host1/Admin(config)# service-policy input MGMT_XML-HTTPS_POLICY To detach the XML HTTPS management policy from an interface, enter: host1/Admin(config-if)# service-policy input MGMT_XML-HTTPS_POLICY To detach the XML HTTPS management policy from an interface, enter: host1/Admin(config-if)# no service-policy input MGMT_XML-HTTPS_POLICY To globally detach the XML HTTPS management policy from all VLANs associated with a context, enter: host1/Admin(config)# no service-policy input MGMT_XML-HTTPS_POLICY OL-11157-01 Cisco 4700 Series Application Control Engine Appliance Administration Guide 9-21