Cisco ACE-4710-K9 Administration Guide - Page 74
Defining a Class Map Description, match-any, match protocol, description
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Configuring Remote Network Management Traffic Services Chapter 2 Enabling Remote Access to the ACE - match-any-Any one of the match criteria listed in the class map is satisfied to match the network traffic class in the class map, typically match commands of different types. • map_name-Specifies the name assigned to the class map. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters. The CLI enters the class map management configuration mode. To classify the remote network management traffic received by the ACE, include one or more of the match protocol commands to configure the match criteria for the class map: For example, to allow SSH and Telnet access to the ACE from IP address 172.16.10.0, enter: host1/Admin(config)# class-map type management match-all SSH-TELNET_ALLOW_CLASS host1/Admin(config-cmap-mgmt)# match protocol ssh source-address 172.16.10.0 255.255.255.254 host1/Admin(config-cmap-mgmt)# match protocol telnet source-address 172.16.10.0 255.255.255.254 host1/Admin(config-cmap-mgmt)# exit host1/Admin(config)# To remove a Layer 3 and Layer 4 network management class map from the ACE, enter: host1/Admin(config)# no class-map type management match-all SSH-TELNET_ALLOW_CLASS Defining a Class Map Description To provide a brief summary about the Layer 3 and Layer 4 remote management class map, use the description command in class map configuration mode. The syntax of this command is: description text Use the text argument to enter an unquoted text string with a maximum of 240 alphanumeric characters. For example, to specify a description that the class map is to allow remote Telnet access, enter: host1/Admin(config)# class-map type management TELNET-ALLOW_CLASS host1/Admin(config-cmap-mgmt)# description Allow Telnet access to the ACE Cisco 4700 Series Application Control Engine Appliance Administration Guide 2-6 OL-11157-01