Cisco ACE-4710-K9 Administration Guide - Page 54
.Clearing NTP Statistics
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Synchronizing the ACE with an NTP Server Chapter 1 Setting Up the ACE Table 1-7 Field Descriptions for show ntp statistics peer Command Field Packets Sent Packets Received Bogus Origin Duplicate Bad Dispersion Bad Reference Time Candidate Order Description Number of packets sent to the NTP peer. Number of packets received from the NTP peer. Number of packets received from the NTP peer of a suspect origin. Number of duplicate packets received from the NTP peer. Number of packets with an invalid dispersion. Note Dispersion measures the errors of the offset values, based on the round-trip delay and the precision of the system and the server. Number of packets with an invalid reference time source. Order in which the ACE may consider this server when it chooses the master. .Clearing NTP Statistics To clear NTP information, use the clear ntp statistics command in Exec mode. The syntax of this command is as follows: clear ntp statistics {all-peers | io | local | memory} The keywords are: • all-peers-Clears I/O statistics for all peers • io-Clears I/O statistics for I/O devices • local-Clears I/O statistics for local devices • memory-Clears I/O statistics for memory For example, to clear the NTP statistics for all peers, enter: host1/Admin# clear ntp statistics all-peers 1-28 Cisco 4700 Series Application Control Engine Appliance Administration Guide OL-11157-01