Cisco ACE-4710-K9 Administration Guide - Page 340
snmp-server community, group, community_name, group_name, Cisco
View all Cisco ACE-4710-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
Defining SNMP Communities Chapter 8 Configuring SNMP Note SNMP communities are applicable only for SNMPv1 and SNMPv2c. SNMPv3 requires user configuration information such as specifying the role group that the user belongs to, authentication parameters for the user, authentication password, and message encryption parameters (see the "Configuring SNMP Users" section). The syntax of this command is as follows: snmp-server community community_name [group group_name | ro] The keywords, arguments, and options are as follows: • community_name-SNMP community name for this system. Enter an unquoted text string with no space and a maximum of 32 alphanumeric characters. • group group_name-(Optional) Identifies the role group to which the user belongs. Enter an unquoted text string with no space and a maximum of 32 alphanumeric characters. Note Only network monitoring operations are supported through the ACE implementation of SNMP. In this case, all SNMP users are automatically assigned the system-defined default group of Network-Monitor. For details on creating users, refer to the Cisco Application Control Engine Module Virtualization Configuration Guide. • ro-(Optional) Allows read-only access for this community. For example, to specify an SNMP community called SNMP_Community1, a member of the Network-Monitor group, with read-only access privileges for the community, enter: host1/Admin(config)# snmp-server community SNMP_Community1 group Network-Monitor To remove an SNMP community, enter: host1/Admin(config)# no snmp-server community SNMP_Community1 group Network-Monitor 8-30 Cisco 4700 Series Application Control Engine Appliance Administration Guide OL-11157-01