D-Link DES-3010G Reference Manual - Page 101

IGMP Snooping Commands, config igmp_snooping

Get D-Link DES-3010G PDF manuals and user guides View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 101 highlights

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual 18 IGMP SNOOPING COMMANDS The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config igmp_snooping config igmp_snooping querier config router_ports enable igmp snooping disable igmp snooping show igmp snooping show igmp snooping group show router_ports Parameters [ | all] {host_timeout | router_timeout | leave_timer | state [enable | disable] | fast_leave [enable | disable]} [ | all] { query_interval | max_response_time robustness_variable | last_member_query_interval | state [enabled | disabled] [add | delete] {forward_mcrouter_only} {vlan } {vlan } {vlan } {static | dynamic} Each command is listed, in detail, in the following sections. config igmp_snooping Purpose Syntax Description Parameters Used to configure IGMP snooping on the Switch. config igmp_snooping [ | all] {host_timeout | router_timeout | leave_timer | state [enable | disable] | fast_leave [enable | disable]} This command allows the user to configure IGMP snooping on the Switch. − The name of the VLAN for which IGMP snooping is to be configured. all - Selecting this parameter will configure IGMP for all VLANs on the Switch. host_timeout − Specifies the maximum amount of time a host can be a member of a multicast group without the Switch receiving a host membership report. The default is 260 seconds. router_timeout − Specifies the maximum amount of time a route can be a member of a multicast group without the Switch receiving a host membership report. The default is 260 seconds. leave_timer − Leave timer. The default is 2 seconds. state [enable | disable] − Allows the user to enable or disable IGMP snooping for the specified VLAN. fast_leave [enable | disable] - This parameter allows the user to enable the fast leave function. Enabled, this function will allow members of a multicast 99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
18
IGMP S
NOOPING
C
OMMANDS
The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
Parameters
config igmp_snooping
[<vlan_name 32> | all] {host_timeout <sec 1-16711450> |
router_timeout <sec 1-16711450> | leave_timer <sec 1-
16711450> | state [enable | disable] | fast_leave [enable |
disable]}
config igmp_snooping
querier
[<vlan_name 32> | all] { query_interval <sec 1-65535>|
max_response_time <sec 1-25> robustness_variable <value 1-
255> | last_member_query_interval <sec 1-25> | state [enabled |
disabled]
config router_ports
<vlan_name 32> [add | delete] <portlist>
enable igmp snooping
{forward_mcrouter_only}
disable igmp snooping
show igmp snooping
{vlan <vlan_name 32>}
show igmp snooping group
{vlan <vlan_name 32>}
show router_ports
{vlan <vlan_name 32>} {static | dynamic}
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose
Used to configure IGMP snooping on the Switch.
Syntax
config igmp_snooping [<vlan_name 32> | all] {host_timeout <sec 1-
16711450> | router_timeout <sec 1-16711450> | leave_timer <sec 0-
16711450> | state [enable | disable] | fast_leave [enable | disable]}
Description
This command allows the user to configure IGMP snooping on the Switch.
Parameters
<vlan_name 32>
−
The name of the VLAN for which IGMP snooping is to
be configured.
all
– Selecting this parameter will configure IGMP for all VLANs on the
Switch.
host_timeout <sec 1-16711450>
−
Specifies the maximum amount of time a
host can be a member of a multicast group without the Switch receiving a
host membership report. The default is 260 seconds.
router_timeout <sec 0-16711450>
−
Specifies the maximum amount of time
a route
can be a member of a multicast group without the Switch receiving
a host membership report. The default is 260 seconds.
leave_timer <sec 0-16711450>
−
Leave timer. The default is 2 seconds.
state [enable | disable]
−
Allows the user to enable or disable IGMP
snooping for the specified VLAN.
fast_leave [enable | disable]
– This parameter allows the user to enable the
fast leave
function. Enabled, this function will allow members of a multicast
99