D-Link DES-3010G Reference Manual - Page 29
Command, Parameters, create snmp user <SNMPname 32> <groupname 32> {encrypted
![]() |
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual Command delete snmp group show snmp groups create snmp host delete snmp host show snmp host enable rmon disable rmon create trusted_host delete trusted_host show trusted_host enable snmp traps disable snmp traps enable snmp authenticate traps disable snmp authenticate traps show snmp traps config snmp system_contact config snmp system_location config snmp system_name Parameters | notify_view } [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]] {} Each command is listed, in detail, in the following sections. create snmp user Purpose Syntax Description Parameters Used to create a new SNMP user and adds the user to an SNMP group that is also created by this command. create snmp user {encrypted [by_password auth [md5 | sha ] priv [none | des ] | by_key auth [md5 | sha ] priv [none | des ]]} The create snmp user command creates a new SNMP user and adds the user to an SNMP group that is also created by this command. − An alphanumeric name of up to 32 characters that will identify the new SNMP user. − An alphanumeric name of up to 32 characters that will identify the SNMP group the new SNMP user will be 27
![](/manual_guide/products/dlink-des3010g-reference-manual-5af1315/29.png)