D-Link DES-3010G Reference Manual - Page 115
config 802.1x capability ports
![]() |
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual DES-3026:4#show 802.1x auth_configuration ports 1 Command: show 802.1x auth_configuration ports 1 802.1X : Enabled Authentication Mode : Port_based Authentication Protocol : Radius_Eap Port number : 1 Capability : None Port Status : Authorized PAE State : ForceAuth Backend State : Success AdminCrlDir : Both OpenCrlDir : Both Port Control : Auto QuietPeriod : 60 sec TxPeriod : 30 sec SuppTimeout : 30 sec ServerTimeout : 30 sec MaxReq : 2 times ReAuthPeriod : 3600 sec ReAuthenticate : Disabled CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All config 802.1x capability ports Purpose Syntax Description Parameters Restrictions Used to configure the 802.1x capability of a range of ports on the Switch. config 802.1x capability ports [ | all] [authenticator | none] The config 802.1x command has four capabilities that can be set for each port. Authenticator, Supplicant, Authenticator and Supplicant, and None. − Specifies a port or range of ports to be configured. all − Specifies all of the ports on the Switch. authenticator − A user must pass the authentication process to gain access to the network. none − The port is not controlled by the 802.1x functions. Only administrator-level users can issue this command. Example usage: To configure 802.1x capability on ports 1-10: DES-3026:4#config 802.1x capability ports 1-10 authenticator Command: config 802.1x capability ports 1-10 authenticator Success. DES-3026:4# 113
![](/manual_guide/products/dlink-des3010g-reference-manual-5af1315/115.png)