D-Link DES-3010G Reference Manual - Page 141
config sim, config sim [candidate] | dp_interval <30-90> | hold_time <sec
![]() |
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual config sim Purpose Syntax Description Parameters Restrictions Used to configure role parameters for the SIM protocol on the Switch. config sim [candidate] | dp_interval | hold_time ] This command is used to configure parameters of switches of the SIM. candidate - Used to change the role of a commander switch to a candidate switch. dp_interval - The user may set the discovery protocol interval, in seconds that the Switch will send out discovery packets. Returning information to the commander switch will include information about other switches connected to it. (Ex. MS, CaS). The user may set the discovery protocol interval from 30 to 90 seconds. hold time - Using this parameter, the user may set the time, in seconds, the Switch will hold information sent to it from other switches, utilizing the discovery interval protocol. The user may set the hold time from 100 to 255 seconds. Only administrator-level users can issue this command. Example usage: To change the time interval of the discovery protocol: DES-3026:4#config sim candidate dp_interval 30 Command:config sim candidate dp_interval 30 Success. DES-3026:4# To change the hold time of the discovery protocol: DES-3026:4#config sim candidate hold_time 120 Command: config sim candidate hold_time 120 Success. DES-3026:4# 139
![](/manual_guide/products/dlink-des3010g-reference-manual-5af1315/141.png)