D-Link DES-3010G Reference Manual - Page 69
Forwarding Database Commands, create fdb
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual 10 FORWARDING DATABASE COMMANDS The layer 2 forwarding database commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters create fdb port create multicast_fdb config multicast_fdb [add | delete] config fdb aging_time clear fdb [vlan | port | all] show multicast_fdb {vlan | mac_address } show fdb {port | vlan | mac_address | static | aging_time} delete fdb Each command is listed, in detail, in the following sections. create fdb Purpose Syntax Description Parameters Restrictions Example usage: Used to create a static entry to the unicast MAC address forwarding table (database) create fdb port This command will make an entry into the Switch's unicast MAC address forwarding database. − The name of the VLAN on which the MAC address resides. − The MAC address that will be added to the forwarding table. port − The port number corresponding to the MAC destination address. The Switch will always forward traffic to the specified device through this port. Only administrator-level users can issue this command. To create a unicast MAC FDB entry: DES-3026:4#create fdb default 00-00-00-00-01-02 port 2 Command: create fdb default 00-00-00-00-01-02 port 2 Success. DES-3026:4# 67