D-Link DES-3010G Reference Manual - Page 24
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual, Packets: Sent =4 - default ip
![]() |
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual ping Purpose Syntax Description Parameters Restrictions Used to test the connectivity between network devices. ping {times } {timeout } The ping command sends Internet Control Message Protocol (ICMP) echo messages to a remote IP address. The remote IP address will then "echo" or return the message. This is used to confirm connectivity between the Switch and the remote device. - Specifies the IP address of the host. times - The number of individual ICMP echo messages to be sent. The maximum value is 255. The default is 0. timeout - Defines the time-out period while waiting for a response from the remote device. A value of 1 to 99 seconds can be specified. The default is 1 second. Pinging an IP address without the times parameter will ping the target device an infinite amount of times. None. Example usage: To ping the IP address 10.48.74.121 four times: DES-3026:4#ping 10.48.74.121 times 4 Command: ping 10.48.74.121 Reply from 10.48.74.121, time
![](/manual_guide/products/dlink-des3010g-reference-manual-5af1315/24.png)