D-Link DES-3010G Reference Manual - Page 47
show snmp traps, config snmp system_contact, Authenticate Trap
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual show snmp traps Purpose Used to show SNMP trap support on the Switch . Syntax show snmp traps Description This command is used to view the SNMP trap support status currently configured on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To view the current SNMP trap support: DES-3026:4#show snmp traps Command: show snmp traps SNMP Traps : Enabled Authenticate Trap : Enabled DES-3026:4# config snmp system_contact Purpose Syntax Description Parameters Restrictions Used to enter the name of a contact person who is responsible for the Switch. config snmp system_contact {} The config snmp system_contact command is used to enter the name and/or other information to identify a contact person who is responsible for the Switch. A maximum of 255 character can be used. - A maximum of 255 characters is allowed. A NULL string is accepted if there is no contact. Only administrator-level users can issue this command. Example usage: To configure the Switch contact to "M I S D e p a r t m e n t I I ": DES-3026:4#config snmp system_contact MIS Department II Command: config snmp system_contact MIS Department II Success. DES-3026:4# 45