D-Link DES-3010G Reference Manual - Page 26
config ports, show ports, CTRL+C ESC q Quit SPACE n Next p Previous r Refresh - d link switch
![]() |
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual config ports Restrictions description - Enter an alphanumeric string of no more than 32 characters to describe a selected port interface. clear - Enter this command to clear the port description of the selected port(s). Only administrator-level users can issue this command. Example usage: To configure the speed of ports 1-3 to be 10 Mbps, full duplex, learning and state enabled: DES-3026:4#config ports 1-3 speed 10_full state enable Command: config ports 1-3 speed 10_full state enable Success. DES-3026:4# show ports Purpose Syntax Description Parameters Restrictions Used to display the current configuration of a range of ports. show ports {} {description} This command is used to display the current configuration of a range of ports. − Specifies a port or range of ports to be displayed. {description} - Adding this parameter to the command will allow the user to view previously configured descriptions set on various ports on the Switch. None. Example usage: To display the configuration of ports 1-5 on the Switch: DES-3026:4#show ports 1-5 Command: show ports 1-5 Port Port Settings Connection Address State Speed/Duplex/FlowCtrl Speed/Duplex/FlowCtrl Learning -------- 1 Enabled Auto/Enabled 100/Full/none Enabled 2 Enabled Auto/Enabled Link Down Enabled 3 Enabled Auto/Enabled Link Down Enabled 4 Enabled Auto/Enabled Link Down Enabled 5 Enabled Auto/Enabled Link Down Enabled CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh Example usage; To display port descriptions: 24
![](/manual_guide/products/dlink-des3010g-reference-manual-5af1315/26.png)