D-Link DES-3010G Reference Manual - Page 13
Basic Switch Commands, Command, Parameters - reset
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual 4 BASIC SWITCH COMMANDS The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create account config account show account show session show switch show config show serial_port config serial_port enable clipaging disable clipaging enable telnet disable telnet enable web disable web save reboot reset login logout ping Parameters [admin | user] [dram | flash] {baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never | 2_minutes | 5_minutes| 10_minutes | 15_minutes]} {[config | system]} {times } {timeout } Each command is listed, in detail, in the following sections. create account Purpose Syntax Description Parameters Restrictions Used to create user accounts. create [admin | user] The create account command is used to create user accounts that consist of a username of 1 to 15 characters and a password of 0 to 15 characters. Up to 8 user accounts can be created. admin user Only Administrator-level users can issue this command. 11