D-Link DES-3010G Reference Manual - Page 121
create 802.1x user, show 802.1x user, IP Address
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual Example usage: To display RADIUS settings on the Switch: DES-3026:4#show radius Command: show radius Index IP Address 1 10.1.1.1 2 20.1.1.1 3 30.1.1.1 Auth-Port Number --------1812 1800 1812 Acct-Port Number --------1813 1813 1813 Status ----------Active Active Active Key -----------switch des3226 dlink Total Entries : 3 DES-3026:4# create 802.1x user Purpose Used to create a new 802.1x user. Syntax create 802.1x user Description The create 802.1x user command is used to create new 802.1x users. Parameters − A username of up to 15 alphanumeric characters in length. Restrictions Only administrator-level users can issue this command. Example Usage: To create an 802.1x user: DES-3026:4#create 802.1x user dtremblett Command: create 802.1x user dtremblett Enter a case-sensitive new password:****** Enter the new password again for confirmation:****** Success. DES-3026:4# show 802.1x user Purpose Syntax Description Parameters Restrictions Used to display the 802.1x user accounts on the Switch. show 802.1x user The show 802.1x user command is used to display the 802.1x Port-based or MAC-based Network Access control local users currently configured on the Switch. None. None. Example usage: 119