D-Link DES-3010G Reference Manual - Page 44
create trusted_host, show trusted_host, Management Stations
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual create trusted_host Purpose Syntax Description Parameters Restrictions Used to create the trusted host. create trusted_host The create trusted_host command creates the trusted host. The Switch allows you to specify up to four IP addresses that are allowed to manage the Switch via in-band SNMP or TELNET based management software. These IP addresses must be members of the Management VLAN. If no IP addresses are specified, then there is nothing to prevent any IP address from accessing the Switch, provided the user knows the Username and Password. − The IP address of the trusted host to be created. Only administrator-level users can issue this command. Example usage: To create the trusted host: DES-3026:4#create trusted_host 10.48.74.121 Command: create trusted_host 10.48.74.121 Success. DES-3026:4# show trusted_host Purpose Used to display a list of trusted hosts entered on the Switch using the create trusted_host command above. Syntax show trusted_host {} Description This command is used to display a list of trusted hosts entered on the Switch using the create trusted_host command above. Parameters − The IP address of the trusted host. Restrictions None. Example Usage: To display the list of trust hosts: DES-3026:4#show trusted_host Command: show trusted_host Management Stations IP Address 10.53.13.94 Total Entries: 1 DES-3026:4# delete trusted_host 42