D-Link DES-3010G Reference Manual - Page 120
config radius, show radius
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual DES-3026:4#config radius delete 1 Command: config radius delete 1 Success. DES-3026:4# config radius Purpose Syntax Description Parameters Used to configure the Switch's RADIUS settings. config radius {ipaddress | key | auth_port | acct_port } The config radius command is used to configure the Switch's RADIUS settings. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the Switch. − The IP address of the RADIUS server. key − Specifies that a password and encryption key will be used between the Switch and the RADIUS server. − The shared-secret key used by the RADIUS server and the Switch. Up to 32 characters can be used. Restrictions default − Returns all of the ports in the range to their default RADIUS settings. auth_port − The UDP port number for authentication requests. The default is 1812. acct_port − The UDP port number for accounting requests. The default is 1813. Only administrator-level users can issue this command. Example usage: To configure RADIUS settings: DES-3026:4#config radius 1 10.48.74.121 key dlink default Command: config radius 1 10.48.74.121 key dlink default Success. DES-3026:4# show radius Purpose Syntax Description Parameters Restrictions Used to display the current RADIUS configurations on the Switch. show radius The show radius command is used to display the current RADIUS configurations on the Switch. None. None. 118