D-Link DES-3010G Reference Manual - Page 139
disable sim, show sim, SIM State -Displays the current Single IP Management State of
![]() |
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual DES-3026:4#enable sim Command: enable sim Success. DES-3026:4# disable sim Purpose Syntax Description Parameters Restrictions Used to disable Single IP Management (SIM) on the Switch. disable sim This command will disable SIM globally on the Switch. None. Only administrator-level users can issue this command. Example usage: To disable SIM on the Switch: DES-3026:4#disable sim Command: disable sim Success. DES-3026:4# show sim Purpose Syntax Description Used to view the current information regarding the SIM group on the Switch. show sim This command will display the current information regarding the SIM group on the Switch, including the following: SIM Version - Displays the current Single IP Management version on the Switch. Firmware Version - Displays the current Firmware version on the Switch. Device Name - Displays the user-defined device name on the Switch. MAC Address - Displays the MAC Address of the Switch. Capabilities - Displays the type of switch, be it Layer 2 (L2) or Layer 3 (L3). Platform - Switch Description including name and model number. SIM State -Displays the current Single IP Management State of the Switch, whether it be enabled or disabled. Role State - Displays the current role the Switch is taking, including Commander or Member. A stand-alone switch will always have the candidate role. Discovery Interval - Time in seconds the Switch will send discovery packets out over the network. 137
![](/manual_guide/products/dlink-des3010g-reference-manual-5af1315/139.png)