D-Link DES-3010G Reference Manual - Page 18
config serial_port, enable clipaging
View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual DES-3026:4#show serial_port Command: show serial_port Baud Rate Data Bits Parity Bits Stop Bits Auto-Logout : 9600 : 8 : None : 1 : 10 mins DES-3026:4# config serial_port Purpose Syntax Description Parameters Used to configure the serial port. config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes | 5_minutes | 10_minutes | 15_minutes]} This command is used to configure the serial port's baud rate and auto logout settings. baud rate [9600 | 19200 | 38400 | 115200] − The serial bit rate that will be used to communicate with the management host. auto_logout - This parameter will allow the user to choose the time the Switch's serial port will be idle before automatically logging out. The user may choose one of the following. never − No time limit on the length of time the console can be open with no user input. 2_minutes − The console will log out the current user if there is no user input for 2 minutes. 5_minutes − The console will log out the current user if there is no user input for 5 minutes. 10_minutes − The console will log out the current user if there is no user input for 10 minutes. 15_minutes − The console will log out the current user if there is no user input for 15 minutes. Restrictions Only administrator-level users can issue this command. Example usage: To configure the baud rate: DES-3026:4#config serial_port baud_rate 9600 Command: config serial_port baud_rate 9600 Success. DES-3026:4# enable clipaging 16