D-Link DES-3010G Reference Manual - Page 119

config radius add, DES-3026:4#config radius add 1 10.48.74.121 key tomato default - default password

Get D-Link DES-3010G PDF manuals and user guides View all D-Link DES-3010G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 119 highlights

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual config radius add Purpose Syntax Description Parameters Used to configure the settings the Switch will use to communicate with a RADIUS server. config radius add key [default | {auth_port | acct_port }] The config radius add command is used to configure the settings the Switch will use to communicate with a RADIUS server. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the Switch. − The IP address of the RADIUS server. key − Specifies that a password and encryption key will be used between the Switch and the RADIUS server. − The shared-secret key used by the RADIUS server and the Switch. Up to 32 characters can be used. Restrictions default − Returns all of the ports in the range to their default RADIUS settings. auth_port − The UDP port number for authentication requests. The default is 1812. acct_port − The UDP port number for accounting requests. The default is 1813. Only administrator-level users can issue this command. Example usage: To configure RADIUS server communication settings: DES-3026:4#config radius add 1 10.48.74.121 key tomato default Command: config radius add 1 10.48.74.121 key tomato default Success. DES-3026:4# config radius delete Purpose Syntax Description Parameters Restrictions Used to delete a previously entered RADIUS server configuration. config radius delete The config radius delete command is used to delete a previously entered RADIUS server configuration. − Assigns a number to the current set of RADIUS server settings. Up to three groups of RADIUS server settings can be entered on the Switch. Only administrator-level users can issue this command. Example usage: To delete previously configured RADIUS server communication settings: 117

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
config radius add
Purpose
Used to configure the settings the Switch will use to communicate with a
RADIUS server.
Syntax
config radius add <server_index 1-3> <server_ip> key <passwd 32>
[default | {auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}]
Description
The
config radius add
command is used to configure the settings the
Switch will use to communicate with a RADIUS server.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of RADIUS
server settings.
Up to 3 groups of RADIUS server settings can be entered
on the Switch.
<server_ip>
−
The IP address of the RADIUS server.
key
−
Specifies that a password and encryption key will be used between
the Switch and the RADIUS server.
default
−
Returns all of the ports in the range to their default RADIUS
settings.
auth_port <udp_port_number 1-65535>
−
The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number 1-65535>
−
The UDP port number for
accounting requests. The default is 1813.
Restrictions
Only administrator-level users can issue this command.
±
<passwd 32>
−
The shared-secret key used by the RADIUS server
and the Switch. Up to 32 characters can be used.
Example usage:
To configure RADIUS server communication settings:
DES-3026:4#config radius add 1 10.48.74.121 key tomato default
Command: config radius add 1 10.48.74.121 key tomato default
Success.
DES-3026:4#
config radius delete
Used to delete a previously entered RADIUS server configuration.
Syntax
config radius delete <server_index 1-3>
Description
The
config radius delete
command is used to delete a previously entered
RADIUS server configuration.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of RADIUS
server settings. Up to three groups of RADIUS server settings can be
entered on the Switch.
Restrictions
Only administrator-level users can issue this command.
Purpose
Example usage:
To delete previously configured RADIUS server communication settings:
117