D-Link DSR-1000AC User Manual - Page 122

Section 7 - VPN Client Path: VPN > PPTP VPN > Client PPTP VPN Client can be configured on this router. Using this client you can access remote network which is local to PPTP server. Once client is enabled, the user can access Status > Active VPNs page and establish PPTP VPN tunnel clicking Connect. To configure the router as a PPTP VPN client: 1. Click VPN > PPTP VPN > Client tab. 2. Toggle Client to ON and complete the fields in the table below. Field Client Server IP Remote Network Remote Netmask Username Password MPPE Encryption Idle Time Out Auto Dial Time Save Description Toggle to ON to enable PPTP client. Enter the IP address of the PPTP server you want to connect to. Enter the remote network address. This address is local for the PPTP Server. Enter the remote network subnet mask. Enter your PPTP user name. Enter your PPTP password. Toggle to ON to enable Microsoft Point-to-Point Encryption (MPPE). Enter the amount of time (in seconds) that you will disconnect from the PPTP server when idle. Toggle to On to enable Auto Dial Reconnect time Click Save to save and activate your settings. Note: When the PPTP Client configuration is correctly saved and the PPTP server is up, the tunnel initiation starts automatically. D-Link DSR-Series User Manual 109