D-Link DSR-1000AC User Manual - Page 202

Section 9 - Maintenance Remote Management Path: Maintenance > Management > Remote Management Enable this feature to be able to manage the router from a remote location, using HTTPS or Telnet. Both HTTPS and Telnet access can be restricted to a subset of IP addresses. The router administrator can define a known PC, single IP address or range of IP addresses that are allowed to access the GUI with HTTPS. The opened port for SSL traffic can be changed from the default of 443 at the same time as defining the allowed remote management IP address range. 1. Click Maintenance > Management > Remote Management. 2. Complete the fields from the table below and click Save. Field Description Enable Remote Management Toggle to ON to enable remote management. HTTPS Port No. Enter the port for HTTPS access. The default port is 443. SSH Toggle ON to enable SSH (Secure Shell) protocol which can be used to access the CLI over the network from a remote host. SNMP Toggle to ON to enable SNMP for remote management. Access Type Select either All IP Addresses, IP Address Range (enter an IP range), or Only Selected PC (enter an IP address). Respond to Ping Toggle to ON to allow the router to respond to ping requests from the WAN. Save Click to save and activate your settings. D-Link DSR-Series User Manual 189