D-Link DSR-1000AC User Manual - Page 192

Section 9 - Maintenance Date and Time Path: Maintenance > Administration > Date and Time You can configure your time zone, whether or not to adjust for Daylight Savings Time, and with which Network Time Protocol (NTP) server to synchronize the date and time. You can choose to set Date and Time manually, which will store the information on the router's real time clock (RTC). If the router has access to the internet, the most accurate mechanism to set the router time is to enable NTP server communication. 1. Click Maintenance > Administration > Date and Time. 2. Complete the fields from the table below and click Save. Field Current Device Time Time Zone Daylight Saving NTP Servers NTP Server Type Primary NTP Server Secondary NTP Server Time to re-synchronize Save Description Displays the current date and time on the router. Select your time zone from the drop-down menu. Toggle to ON to enable daylight saving time. Toggle to ON to use NTP servers on the Internet. Select either Default or Custom to enter specific NTP Server addresses. If you selected Custom, enter the primary NTP server address. If you selected Custom, enter the secondary NTP server address. Enter the time in minutes for the router to re-synch with the NTP server(s). Click to save and activate your settings. D-Link DSR-Series User Manual 179