D-Link DSR-1000AC User Manual - Page 128

Section 7 - VPN 4. Complete the fields from the table below and click Save. Network Resource IP Address Field Policy Type Available Groups/Users Apply Policy To Policy Name IP Address Mask Length ICMP Begin/End Defined Resources Service Permission Save Description Select Global, Group, or User. If you selected Group, select a group from the drop-down menu. If you selected User, select a user from the drop-down menu. Select Network Resource, IP Address, IP Network, or All Addresses. Enter a unique name for this policy. If you selected IP Address or IP Network, enter the IP address. If you selected IP Network, enter the mask length (0-32). Toggle to ON to include ICMP traffic. Enter a port range or leave blank to include all TCP and UDP ports. These fields are not available when selecting Network Resource. If you selected Network Resource, select the resource for the Defined Resource drop-down menu. If you have not created a resource, refer to "Resources" on page 118 to create a defined resource. Select either VPN Tunnel, Port Forwarding, or All. This field is not available when selecting Network Resource. Select either Permit or Deny. Click to save your settings. D-Link DSR-Series User Manual 115