D-Link DSR-1000AC User Manual - Page 257

Section 11 - Troubleshooting Restoring factory-default configuration settings To restore factory-default configuration settings, do either of the following: 1. Do you know the account password and IP address? • If yes, select Maintenance > Firmware & Config > Soft Reboot and click Default. • If no, do the following: On the rear panel of the router, press and hold the Reset button about 10 seconds, until the test LED lights and then blinks. Release the button and wait for the router to reboot. 2. If the router does not restart automatically; manually restart it to make the default settings effective. 3. After a restore to factory defaults -whether initiated from the configuration interface or the Reset button - the following settings apply: • LAN IP address: 192.168.10.1 • Username: admin • Password: admin • DHCP server on LAN: enabled • WAN port configuration: Get configuration via DHCP D-Link DSR-Series User Manual 244