D-Link DSR-1000AC User Manual - Page 135

Section 7 - VPN Path: VPN > SSL VPN > SSL VPN Client Client Routes If the SSL VPN client is assigned an IP address in a different subnet than the corporate network, a client route must be added to allow access to the private LAN through the VPN tunnel. As well a static route on the private LAN's firewall (typically this router) is needed to forward private traffic through the VPN Firewall to the remote SSL VPN client. When split tunnel mode is enabled, the user is required to configure routes for VPN tunnel clients: • Destination network: The network address of the LAN or the subnet information of the destination network from the VPN tunnel clients' perspective is set here. • Subnet mask: The subnet information of the destination network is set here. To configure a client route: 1. Click VPN > SSL VPN > Client Routes. 2. Click Add New Client Route. 3. Enter the destination network and subnet mask. 4. Click Save. D-Link DSR-Series User Manual 122