D-Link DSR-1000AC User Manual - Page 177
Complete the fields from the table below and click
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Section 8 - Security 3. Complete the fields from the table below and click Save. Field From Zone To Zone Service Action Source Hosts Destination Hosts Log QoS Priority (IPv4 only) Description Select the source of originating traffic: either secure LAN, public DMZ, or insecure WAN. For an inbound rule WAN should be selected. Select the destination of traffic covered by this rule. If the From Zone is the WAN, the To Zone can be the public DMZ or secure LAN. Similarly if the From Zone is the LAN, then the To Zone can be the public DMZ or insecure WAN. Select a service from the drop-down menu. ANY means all traffic is affected by this rule. Select an action from the drop-down menu. Select a source host. If you select Single Address or Address Range, you will need to enter the IP address or IP range. Select a Destination host. If you select Single Address or Address Range, you will need to enter the IP address or IP range. Select whether to log firewall traffic or not. Outbound rules (where To Zone = insecure WAN only) can have the traffic marked with a QoS priority tag. Select a priority level: • Normal-Service: ToS=0 (lowest QoS) • Minimize-Cost: ToS=1 • Maximize-Reliability: ToS=2 • Maximize-Throughput: ToS=4 • Minimize-Delay: ToS=16 D-Link DSR-Series User Manual 164
![](/manual_guide/products/dlink-dsr1000ac-user-manual-3476918/177.png)