D-Link DSR-1000AC User Manual - Page 46

Section 5 - Connect to the Internet Path: Network > Internet > WAN1 Settings L2TP Select L2TP (Username/Password) to enter the L2TP Internet settings supplied by your Internet Service Provider. Field Description Address Mode Select Dynamic IP or Static IP (IP settings supplied by your ISP). Server Address Enter your PPTP server address. User Name Enter your PPTP user name. Password Enter your PPTP password. Secret Enter a shared secret if required. Split Tunnel Toggle to ON to use split tunnelling. This will allow you to connect to a VPN and Internet using the same physical connection. Reconnect Mode Some ISPs may require you to pay for usage time. Select On Demand if this is the case. This will have the router connect to the Internet only when you initiate an Internet connection. Select Always On to have the router stay connected to the Internet. IP Address If you selected Static IP, enter the IP address supplied by your ISP. IP Subnet Mask If you selected Static IP, enter the subnet mask supplied by your ISP. IP Gateway If you selected Static IP, enter the gateway IP address supplied by your ISP. DNS Server Source Select either Get Dynamically from ISP or Use These DNS Servers to manually enter DNS servers. Primary DNS Server If you selected "Use These DNS Servers", enter the primary DNS server IP address. Secondary DNS Server If you selected "Use These DNS Servers", enter the secondary DNS server IP address. Select Use Default MAC to use the MAC address from the WAN1 port to associate with your modem/ MAC Address Source ISP, Clone your PC's MAC Address to use the MAC address of the computer you are currently using to associate with your modem/ISP, or Use this MAC to manually enter a MAC address. MAC Address If you selected Use this MAC, enter the MAC address you want to associate with your ISP. MTU Size Select to use the default MTU value (1500) or select Custom to enter your own value. Custom MTU Enter a MTU value to optimize performance with your ISP. Port Speed Select a value from the drop-down menu. The default value is Auto-Sense. Save Click Save to save and activate your settings. D-Link DSR-Series User Manual 33