D-Link DSR-1000AC User Manual - Page 69

Section 5 - Connect to the Internet Traffic Shaping Path: Network > Internet > Traffic Management > Traffic Shaping Once a profile has been created it can then be associated with a traffic flow from the LAN to WAN. Traffic selector configuration binds a bandwidth profile to a type or source of LAN traffic with the following settings. To create a traffic selector: 1. Click Network > Internet > Traffic Management > Traffic Shaping. 2. Click Add New Traffic Selector. 3. Complete the fields from the table below and click Save. Field Available Profiles Service Traffic Selector Match Type IP Address Subnet Mask MAC Address Save Description Select a bandwidth profile from the drop-down menu. Select a service from the drop-down menu. Select IP or MAC Address. If you selected IP, enter the IP address of the source associated with this profile. If you selected IP, enter a subnet mask. If you selected MAC, enter the MAC address of the source associated with this profile. Click to save and activate your settings. D-Link DSR-Series User Manual 56