D-Link DSR-1000AC User Manual - Page 64
DMZ Settings
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Section 5 - Connect to the Internet DMZ Settings Path: Network > Internet > DMZ Settings If you set WAN2 port to DMZ, you will need to configure the port here. To configure the DMZ Settings: 1. Click Network > Internet > DMZ Settings. 2. Complete the fields from the table below and click Save. Field IP Address Subnet Mask DHCP Mode DHCP Server DHCP Relay Enable DNS Proxy Primary DNS Server Secondary DNS Server WINS Server Save Description Enter an IP address for the DMZ interface. Enter the subnet mask for the DMZ interface. Select one of the following modes: • None - Turns off DHCP. • DHCP Server (default) - The router will act as the DHCP server on your network. • DHCP Relay - DHCP clients on your network will receive IP address leases from a DHCP server on a different subnet. Refer to "DHCP Server" on page 19 for more information. Refer to "DHCP Relay" on page 20 for more information. Toggle to On to manually enter DNS and/or WINS server IP address(es). If set to Off, your router's LAN IP address will be assigned the DNS server to your clients and the router will get the DNS information from your ISP. If DNS Proxy is set to ON, enter the primary DNS server IP address. If DNS Proxy is set to ON, enter the secondary DNS server IP address. If DNS Proxy is set to ON, enter the WINS server IP address. Click to save and activate your settings. D-Link DSR-Series User Manual 51