D-Link DSR-1000AC User Manual - Page 90

Section 5 - Connect to the Internet LAN Settings DHCPv6 Server Path: Network > IPv6 > LAN Settings > IPv6 LAN Settings In IPv6 mode, the LAN DHCP server is disabled by default (similar to IPv4 mode). The DHCPv6 server will serve IPv6 addresses from configured address pools with the IPv6 Prefix Length assigned to the LAN. The default IPv6 LAN address for the router is fec0::1. You can change this 128-bit IPv6 address based on your network requirements. The other field that defines the LAN settings for the router is the prefix length. The IPv6 network (subnet) is identified by the initial bits of the address called the prefix. By default this is 64 bits long. All hosts in the network have common initial bits for their IPv6 address; the number of common initial bits in the network's addresses is set by the prefix length field. To configure IPv6 LAN settings on the router: 1. Click Network > IPv6 > LAN Settings > IPv6 LAN Settings. 2. Complete the fields in the table on the next page and click Save. D-Link DSR-Series User Manual 77