D-Link DSR-1000AC User Manual - Page 32

Section 4 - LAN Configuration DHCP Server 1. Select DHCP Server from the drop-down menu. 2. Complete the fields in the table below and click Save. Field DHCP Mode Starting IP Address Ending IP Address Default Gateway Domain Name Lease Time Configure DNS/WINS Save Description Select DHCP Server from the drop-down menu. Enter the starting IP address in the DHCP address pool. Any new DHCP client joining the LAN is assigned an IP address within the starting and ending IP address range. Starting and ending IP addresses must be in the same IP address subnet as the router's LAN IP address. Enter the ending IP address in the DHCP address pool. Enter the default gateway IP address you want to assign to your DHCP clients. This IP is usually the router's LAN IP address (default is 192.168.10.1). Enter a domain name. Enter the time, in hours, for which IP addresses are leased to clients. Toggle to On to manually enter DNS and/or WINS server IP address(es). If set to Off, your router's LAN IP address will be assigned the DNS server to your clients and the router will get the DNS information from your ISP. Click Save at the bottom to save and activate your settings. D-Link DSR-Series User Manual 19