D-Link DSR-1000AC User Manual - Page 136

Section 7 - VPN VPN > OpenVPN > Settings Open VPN Settings OpenVPN allows peers to authenticate each other using certificates, or username/password. When used in a multiclient-server configuration, it allows the server to release an authentication certificate for every client, using signature and Certificate authority. An OpenVPN can be established through this router. You can select server mode, client mode, or access server client mode. In access server client mode, the user has to download the auto login profile from the OpenVPN Access Server and upload the same to connect. Server To configure the router as an OpenVPN Server: 1. Click VPN > OpenVPN > Settings. 2. Toggle OpenVPN to ON and complete the fields in the table below. Field Mode VPN Network VPN Netmask Duplicate CN Port Tunnel Protocol Encryption Algorithm Hash Algorithm Tunnel Type Save Description Select Server. Enter the IP network for the VPN. Enter the netmask. Toggle On to allow a same certification for multiple clients. Enter what port to use. The default port is 1194. Select either TCP or UDP. Select the encryption algorithm from the drop-down menu. Select the hash algorithm from the drop-down menu. Select either Full Tunnel or Split Tunnel. Full Tunnel mode just sends all traffic from the client across the VPN tunnel to the router. Split Tunnel mode only sends traffic to the private LAN based on pre-specified client routes. If you select Split Tunnel, refer to "Local Networks" on page 127 to create local networks. Click Save to save and activate your settings. D-Link DSR-Series User Manual 123