D-Link DSR-1000AC User Manual - Page 125

Section 7 - VPN Client L2TP VPN Client can be configured on this router. Using this client we can access remote network which is local to L2TP server. Once client is enabled, the user can access Status > Active VPNs page and establish L2TP VPN tunnel clicking Connect. To configure the router as a L2TP VPN client: 1. Click VPN > L2TP VPN > Client tab. 2. Toggle Client to ON and complete the fields in the table below. Field Client Server IP Remote Network Remote Netmask Username Password Reconnect Mode MPPE Encryption Auto Dial Time Save Description Toggle to ON to enable L2TP client. Enter the IP address of the L2TP server you want to connect to. Enter the remote network address. This address is local for the L2TP Server. Enter the remote network subnet mask. Enter your L2TP user name. Enter your L2TP password. Select Always On or On Demand. Toggle to ON to enable Microsoft Point-to-Point Encryption (MPPE). Toggle to On to enable Auto Dial Reconnect time Click Save to save and activate your settings. Note: When the L2TP Client configuration is correctly saved and the L2TP server is up, the tunnel initiation starts automatically. D-Link DSR-Series User Manual 112