D-Link DSR-1000AC User Manual - Page 50
Russian L2TP
![]() |
View all D-Link DSR-1000AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Section 5 - Connect to the Internet Russian L2TP Path: Network > Internet > WAN1 Settings Select Russian dual access L2TP to enter the L2TP Internet settings supplied by your Internet Service Provider. Field Address Mode Server Address User Name Password Secret Split Tunnel Reconnect Mode IP Address IP Subnet Mask Gateway IP Address DNS Server Source Primary DNS Server Secondary DNS Server MAC Address Source MAC Address MTU Size Custom MTU Port Speed Save Description Select Dynamic IP or Static IP (IP settings supplied by your ISP). Enter your PPTP server address. Enter your PPTP user name. Enter your PPTP password. Enter a shared secret if required. Toggle to ON to use split tunnelling. This will allow you to connect to a VPN and Internet using the same physical connection. Some ISPs may require you to pay for usage time. Select On Demand if this is the case. This will have the router connect to the Internet only when you initiate an Internet connection. Select Always On to have the router stay connected to the Internet. If you selected Static IP, enter the IP address supplied by your ISP. If you selected Static IP, enter the subnet mask supplied by your ISP. If you selected Static IP, enter the gateway IP address supplied by your ISP. Select either Get Dynamically from ISP or Use These DNS Servers to manually enter DNS servers. If you selected "Use These DNS Servers", enter the primary DNS server IP address. If you selected "Use These DNS Servers", enter the secondary DNS server IP address. Select Use Default MAC to use the MAC address from the WAN1 port to associate with your modem/ISP, Clone your PC's MAC to use the MAC address of the computer you are currently using to associate with your modem/ISP, or Use this MAC to manually enter a MAC address. If you selected Use this MAC, enter the MAC address you want to associate with your ISP. Select to use the default MTU value (1500) or select Custom to enter your own value. Enter a MTU value to optimize performance with your ISP. Select a value from the drop-down menu. The default value is Auto-Sense. Click Save to save and activate your settings. D-Link DSR-Series User Manual 37
![](/manual_guide/products/dlink-dsr1000ac-user-manual-3476918/50.png)