Dell E514dw Dell Color Multifunction Printer Users Guide - Page 174
Use a Non-Dell Cordless External Handset, Use the Remote Codes
View all Dell E514dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
If you answer a call and no one is on the line: You should assume that you're receiving a manual fax. Press *51 and wait for the chirp or until the LCD displays Receiving, and then hang up. NOTE: You can also use the Easy Receive feature to make your machine automatically take the call. Use a Non-Dell Cordless External Handset Related Models:Dell E515dn / Dell E515dw If your non-Dell cordless telephone is connected to the EXT. jack of the machine and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay. If you let the machine answer first, you must go to the machine so you can press Hook or Hook to transfer the call to the cordless handset. Use the Remote Codes Related Models:Dell E515dn / Dell E515dw Fax Receive Code If you answer a fax call on an extension telephone, you can tell your machine to receive it by pressing the Fax Receive Code *51. Wait for the chirping sounds then replace the handset. If you answer a fax call at the external telephone, you can make the machine receive it by pressing the buttons in the following table. Applicable Models Dell E515dn/Dell E515dw To make the machine receive the fax Start and then 2 Telephone Answer Code If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T ring (pseudo/double-ring) after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T ring off by pressing #51 (make sure you press this between the rings). If the machine answers a voice call and pseudo/double-rings for you to take over, you can take the call at the external telephone by pressing the button in the following table. Applicable Models Dell E515dn/Dell E515dw To make the machine receive the fax Hook Change the Remote Codes Related Models:Dell E515dn / Dell E515dw The preset Fax Receive Code is *51. The preset Telephone Answer Code is #51. If you are always disconnected when accessing your External TAD remotely, try changing the three-digit remote codes, for example ### and 999. 1. Press (Fax). 2. Press Menu. 3. Press p or q to display the Fax option, and then press OK. 4. Press p or q to display the Setup Receive option, and then press OK. 174 Fax