Dell E514dw Dell Color Multifunction Printer Users Guide - Page 237

Print the WLAN Report, Wireless LAN Report Error Codes

Page 237 highlights

NOTE: This feature restores all wired and wireless network settings to the factory settings. NOTE: You can also reset the print server to its factory settings using Web Based Management. 1. Press Menu. 2. Press p or q to display the Network option, and then press OK. 3. Press p or q to display the Network Reset option, and then press OK. 4. Follow the machine's instruction to reset the network settings. The machine will restart. Print the WLAN Report Related Models:Dell E514dw / Dell E515dw The WLAN Report reflects your machine's wireless status. If the wireless connection fails, check the error code on the printed report. 1. Press Menu. 2. Do one of the following: • Dell E515dw Press p or q to display the Print Reports option, and then press OK. • Dell E514dw Press p or q to display the Machine Info. option, and then press OK. 3. Press p or q to select the WLAN Report option, and then press OK. 4. Press Start The machine will print the WLAN Report. Wireless LAN Report Error Codes Related Models:Dell E514dw / Dell E515dw If the Wireless LAN Report shows that the connection failed, check the error code on the printed report and refer to the corresponding instructions in the table: Error Code TS-01 TS-02 Problem and Recommended Solutions The wireless setting is not activated, turn the wireless setting to ON. If a network cable is connected to your machine, disconnect it and turn the wireless setting of your machine to ON. The wireless access point/router cannot be detected. 1. Check the following four points: • Make sure that the wireless access point/router is powered on. • Move your machine to an obstruction-free area, or closer to the wireless access point/router. • Temporarily place your machine within about 3.3 feet (one meter) from the wireless access point when you are configuring the wireless settings. • If your wireless access point/router is using MAC address filtering, confirm the MAC address of the Dell machine is allowed in the filter. 2. If you manually entered the SSID and security information (SSID/authentication method/encryption method/Network Key), the information may be incorrect. Confirm the SSID and security information and enter the correct information as necessary. Network 237

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372
  • 373
  • 374
  • 375
  • 376
  • 377
  • 378
  • 379
  • 380
  • 381
  • 382
  • 383
  • 384
  • 385
  • 386

237
Network
NOTE:
This feature restores all wired and wireless network settings to the factory settings°
NOTE:
You can also reset the print server to its factory settings using Web Based Management°
1.
Press
Menu
.
2.
Press
p
or
q
to display the
Network
option, and then press
OK
.
3.
Press
p
or
q
to display the
Network Reset
option, and then press
OK
.
4.
Follow the machine's instruction to reset the network settings.
The machine will restart.
Print the WLAN Report
Related Models:Dell E514dw / Dell E515dw
The WLAN Report reflects your machine's wireless status. If the wireless connection fails, check the error code on
the printed report.
1.
Press
Menu
.
2.
Do one of the following:
• Dell
E515dw
Press
p
or
q
to
display
the
Print Reports
option,
and
then
press
OK
.
• Dell
E514dw
Press
p
or
q
to
display
the
Machine Info.
option,
and
then
press
OK
.
3.
Press
p
or
q
to select the
WLAN Report
option, and then press
OK
.
4.
Press
Start
The machine will print the WLAN Report.
Wireless LAN Report Error Codes
Related Models:Dell E514dw / Dell E515dw
If the Wireless LAN Report shows that the connection failed, check the error code on the printed report and refer to
the corresponding instructions in the table:
Error Code
Problem and Recommended Solutions
TS-01
The wireless setting is not activated, turn the wireless setting to ON.
If a network cable is connected to your machine, disconnect it and turn the wireless setting of your machine to
ON.
TS-02
The wireless access point/router cannot be detected.
1. Check the following four points:
• Make sure that the wireless access point/router is powered on.
• Move your machine to an obstruction-free area, or closer to the wireless access point/router.
• Temporarily place your machine within about 3.3 feet (one meter) from the wireless access point when you
are configuring the wireless settings.
• If your wireless access point/router is using MAC address filtering, confirm the MAC address of the Dell
machine is allowed in the filter.
2. If you manually entered the SSID and security information (SSID/authentication method/encryption
method/Network Key), the information may be incorrect. Confirm the SSID and security information and
enter the correct information as necessary.