Dell IP4700 Service Guide - Page 109
Size and Weight, Drive Type, LCC Copper Cabling, Ethernet Cabling
View all Dell IP4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Size and Weight Drive Type LCC Copper Cabling Ethernet Cabling Standards Certification and Compliance Technical Specifications and Operating Limits A Item Height Width Depth Weight Measurement 28.59 cm (11.25 in), 6.5 NEMA units (U), including mounting hardware 44.5 cm (17.5 in); mounting bars fit standard 19-inch NEMA cabinets 70.02 cm (27.57 in) front door to back of drive fan pack 67.10 cm (26.42 in) enclosure front to back of drive fan pack 64.12 cm (25.24 in) rail front to back of drive fan pack IP4700 with 2 storage processors (SPs), 2 link control cards (LCCs), 2 power supplies, and 10 disk modules: 52.0 kg (114.4 lbs) Disk module: 1.0 kg (2.3 lbs) Drive fan pack: 1.8 kg (4.0 lbs) SP: 1.8 kg (4.0 lbs) SP fan pack: 1.8 kg (4.0 lbs) LCC: 0.8 kg (1.7 lbs) Power supply: 5.4 kg (12.0 lbs) 3.5-inch drives, Fibre Channel interface, 2.54 cm (1.0 inches) or 4.06 cm (1.6 inches) tall. The IP4700's LCC expansion port interface to the DAE is copper cable as follows: Type Length Shielded, 75-W twin-axial, shield bonded to DB-9 plug connector shell (360°) FC-AL Standard, Revision 4.4 or higher 0.3 m (1 ft) min, 10 m (33 ft) max unequalized between IP4700 and DAEs Use only category 5 Ethernet cable for 10/100 LAN connections. Use either 62.5 or 50 micron fibre optic cable gigabit LAN connections. A stand-alone IP4700 will be tested and certified for compliance with the international environmental and safety specifications listed below. Each IP4700 will be marked to indicate such compliance and certification as required. IP4700 Technical Specifications A-3