Dell IP4700 Service Guide - Page 73
Replacing the Storage Processor Fan Pack, If the pack is removed for more than about two minutes
View all Dell IP4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Servicing and Upgrading an IP4700 3 Replacing the Storage Processor Fan Pack ! CAUTION Handle a fan pack gently and use an ESD wristband. Do not remove a faulty fan pack until you have a replacement available. You can remove the fan pack while the IP4700 is powered up. If the pack is removed for more than about two minutes, the storage processors and disk modules power down. They power up when you reinstall the storage processor fan pack. To remove the storage processor fan pack: 1. At the front of the IP4700, grasp the storage processor fan pack cover at its sides and pull it from its ballstud mounts, as shown in Figure 3-5. EMC1448 Figure 3-5 Removing the SP Fan Pack Cover 2. Slide the latches on the fan pack in toward the center of the fan pack. Replacing the Storage Processor Fan Pack 3-13