Dell IP4700 Service Guide - Page 95
right SPS, as shown in Use two screws to fasten the right SPS
View all Dell IP4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
The Standby Power Supply (SPS) 4 5. Use two screws to fasten the left SPS's attachment bracket to the tray. See Figure 4-5. 6. Use four screws to fasten an attachment bracket to the left and right SPS, as shown in Figure 4-5. 7. Use two screws to fasten the right SPS's attachment bracket to the mounting flange on the tray. See Figure 4-5. Screw (2) Screw (4) Middle attachment bracket Figure 4-5 Securing the Two SPS Units to the Cabinet EMC1693 Installing an SPS in a Rackmount Tray 4-7
4
Installing an SPS in a Rackmount Tray
4-7
The Standby Power Supply (SPS)
5.
Use two screws to fasten the left SPS
’
s attachment bracket to the
tray. See Figure 4-5.
6.
Use four screws to fasten an attachment bracket to the left and
right SPS, as shown in Figure 4-5.
7.
Use two screws to fasten the right SPS
’
s attachment bracket to the
mounting flange on the tray. See Figure 4-5.
Figure 4-5
Securing the Two SPS Units to the Cabinet
EMC1693
Middle
attachment
bracket
Screw
(2)
Screw
(4)