Dell Latitude CP Replacement Instructions - Page 10

ZIF Connectors, Pull gently upward on the movable part of the connector until

Get Dell Latitude CP PDF manuals and user guides View all Dell Latitude CP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

movable part of connector (do not remove) Some of the computer's interface connectors are zero insertion force (ZIF) connectors. These connectors are not removable, but they must be released to disconnect a cable from them. To disconnect an interface cable from a ZIF connector, follow these steps: 1. Insert a small flat-blade screwdriver under the movable part of the connector. 2. Pull gently upward on the movable part of the connector until it releases the interface cable. 3. Grasp the interface cable and pull it out of the connector. To reconnect an interface cable to a ZIF connector, follow these steps: 1. Use a small flat-blade screwdriver to open the movable part of the ZIF connector. 2. Orient the end of the interface cable with the ZIF connector, and insert the end of the cable into the connector. 3. While holding the cable in place, close the ZIF connector. To ensure a firm connection, make sure the ZIF connector is completely closed. 4 Dell Latitude CP and CPi - Parts Removal and Replacement Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
4
Dell Latitude CP and CPi
—
Parts Removal and Replacement Guide
ÏͺµÀ¾Â²ż¾»¹
±²³´µ¶·#¹··$²ÇλÀÀ¶Î¾²À³·ÁÀ·°À¾¶µ"Áζ·ºÁÈɶ
Some of the computer
’
s interface connectors are zero insertion force (ZIF)
connectors. These connectors are not removable, but they must be released
to disconnect a cable from them.
±²³´µ¶·¸ ´Á¿ (µ# ¼Äºº¿¼¾ÄÂÀ ½Â¿ ɽǹſΠ´Ä ½ÌĹ» »½Æ½Ç¿% »Ä ºÄ¾
½ÃÃÅÊ ¾ÄÄ Æ˼Á ÿÀÀË¿ ¾Ä ¾Á¿ ÆÄ̽ÍÅ¿ ý¾ ÄÉ ¾Á¿ ¼Äºº¿¼¾ÄÂÎ
To disconnect an interface cable from a ZIF connector, follow these steps:
1.
Insert a small flat-blade screwdriver under the movable part of the
connector.
2.
Pull gently upward on the movable part of the connector until it
releases the interface cable.
3.
Grasp the interface cable and pull it out of the connector.
To reconnect an interface cable to a ZIF connector, follow these steps:
1.
Use a small flat-blade screwdriver to open the movable part of the ZIF
connector.
2.
Orient the end of the interface cable with the ZIF connector, and
insert the end of the cable into the connector.
3.
While holding the cable in place, close the ZIF connector.
To ensure a firm connection, make sure the ZIF connector is completely
closed.
movable part of
connector
(do not remove)