Dell Latitude CP Replacement Instructions - Page 45
Audio Board, connectors on the audio board.
View all Dell Latitude CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
5-mm screw audio shield audio board speaker wires 1. Remove the palmrest assembly. 2. Remove the 5-mm screw securing the audio board shield. 3. Remove the audio board shield. 4. Disconnect the speaker wires and microphone wires from their connectors on the audio board. The connectors are fragile-do not pull on the wires to disconnect them. 5. Remove the audio board from the bottom case. NOTE: When replacing the audio shield, ensure that the audio shield is properly seated to prevent it from cutting into the speaker wires or interfering with devices installed in the modular bay. (You can check this by temporarily installing a device in the modular bay prior to reinstalling the palmrest assembly.) Dell Latitude CP and CPi - Parts Removal and Replacement Guide 39