Dell Latitude CP Replacement Instructions - Page 27
Palmrest Assembly, Remove the keyboard.
View all Dell Latitude CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
The palmrest assembly consists of the touch pad and the palmrest. palmrest assembly 5-mm screws (2) 5-mm screw bottom case assembly 12-mm screws (3) 1. Remove the keyboard. 2. Disconnect the touch-pad cable from ZIF connector JP2 on the system board. 3. Remove the back cover assembly. 4. Remove the following screws securing the palmrest to the computer: One 5-mm screw inside the computer, adjacent to the thermal cooling assembly Two 5-mm screws inside the upper edge of the hard-disk drive bay (you must remove the hard-disk drive to access these screws) Three 12-mm screws underneath the front edge of the computer Dell Latitude CP and CPi - Parts Removal and Replacement Guide 21
Dell Latitude CP and CPi
—
Parts Removal and Replacement Guide
21
ɲÀ¾³¼¸Êº½¸¸¼¾¿ÀÁ
The palmrest assembly consists of the touch pad and the palmrest.
±²³´µ¶·¸Â¹··&Áɼµ¶Ç¾·ÆÇǶ¼ÈÉŷʶ¼»ËÁÉ···
1.
Remove the keyboard.
2.
Disconnect the touch-pad cable from ZIF connector JP2 on the
system board.
3.
Remove the back cover assembly.
4.
Remove the following screws securing the palmrest to the computer:
±
One 5-mm screw inside the computer, adjacent to the thermal cooling
assembly
±
Two 5-mm screws inside the upper edge of the hard-disk drive bay
(you must remove the hard-disk drive to access these screws)
±
Three 12-mm screws underneath the front edge of the computer
palmrest assembly
bottom
case assembly
12-mm screws (3)
5-mm screws (2)
5-mm screw