Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Service Manual - Page 100
Primary SCSI
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Serial Port 1 Serial Port 2 Parallel Port Parallel Mode Diskette Speaker Primary SCSI Secondary SCSI Processor field Level 2 Cache System Memory Video Memory Service Tag Asset Tag Configures system's built-in serial ports. These options may be set to Auto (default) to automatically configure a port, to a specific designation (COM1 [3F8h] or COM3 [3E8h] for Serial Port 1; COM2 [2F8h] or COM4 [2E8h] for Serial Port 2), or to Off. Configures system's built-in parallel port. The port's I/O address may be set to 378h (default), 278h, 3BCh, or to Off to disable the port. Controls whether system's built-in parallel port acts as an AT-compatible (unidirectional) or PS/2-compatible (bidirectional) port. Controls operation of the system's built-in diskette controller. Determines whether the built-in speaker is On (default) or Off. Turns the respective SCSI controllers on or off. Selecting On (default) enables a controller and allows scanning of the devices connected to it, allowing the device with the lowest SCSI ID to function as a boot device (unless a boot device connected to an enabled controller higher in the scan sequence has already been detected). Selecting Off causes the BIOS to mask the presence of a controller. Displays microprocessor type and speed. Displays size of integrated cache. Displays entire amount of installed memory detected in system, except for memory on EMS expansion cards. Displays amount of video memory detected. Displays system's five-character service tag number. Displays the asset tag number if one is assigned. A-4 Dell PowerEdge 4300 Systems Service Manual