Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Service Manual - Page 52
Server Assistant
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Incorrect Time or Date settings or defective system battery Defective system board Check the Time and Date settings. If the problem persists, replace the battery. Replace the system board. Faulty or improperly seated DIMM or defective system board Microprocessor not supported by system Microprocessor not supported by BIOS Remove and reseat the DIMMs. If the problem persists, replace the DIMMs. If the problem still persists, replace the system board. Install a correct version of the microprocessor in the specified microprocessor connector. Upgrade the BIOS. Wrong microprocessor speed; no microprocessor or terminator card installed in one or more of the microprocessor connectors Ensure that each microprocessor connector has either a terminator card or a microprocessor installed. Ensure only 100-MHz microprocessors are used. Some portion of system firmware is out of date, possibly as result of power being removed from the system while servicing the battery, PSPB, system board, or SCSI backplane Faulty diskette or hard-disk drive Reflash the system firmware from the Dell Server Assistant CD (if available) or from the Dell Web site. Replace the diskette or hard-disk drive. 3-12 Dell PowerEdge 4300 Systems Service Manual