Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Service Manual - Page 59
Removing and replacing hard-disk drives in the external drive bay insert
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
This chapter provides procedures for removing the components, assemblies, and subassemblies in the computer. Unless otherwise noted, each procedure is based on the following assumptions: You have performed the steps in "Precautionary Measures" found later in this chapter. You have removed the computer cover and/or front bezel as necessary. You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided. The PowerEdge 4300 has been designed for greater manual serviceability. Removing and replacing hard-disk drives in the external drive bay insert requires a small flat-blade screwdriver. The remaining procedures do not require the use of tools. Also, use a wrist grounding strap as explained in the next section, "Precautionary Measures." Removing and Replacing Parts 4-1