Dell PowerEdge 4300 Dell PowerEdge 4300 Systems Service Manual - Page 82
NOTE: This is, a hot-pluggable procedure.
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
NOTE: This is not a hot-pluggable procedure. To remove the power cable bundle that mates to the bottom of the drive fan assembly, follow these steps: 1. Remove the drive fan assembly. 2. Squeeze the ends of the power-cable bundle connector while pulling the cable (from the connector) out from under the metal support bracket. 3. Disconnect the other end of the cable from the FAN connector on the SCSI backplane. retention tabs (2) NOTE: This is not a hot-pluggable procedure. To replace a faulty fan in a drive fan assembly before storing the assembly for future use, follow these steps: 1. Remove the faulty fan from the fan carrier by releasing the two retention tabs that secure the fan in the carrier (see Figure 4-19) and working the fan out of the carrier. 2. Remove the fan's power cable from the carrier's power harness bundle. 3. Use the push fasteners that came with the new fan to install the metal finger guard on the fan. Install the guard so that the fan's airflow arrow points toward the guard. 4. Connect the new fan's cable to the carrier's power harness bundle. 5. Insert the new fan into the carrier under the two retention tabs. 4-24 Dell PowerEdge 4300 Systems Service Manual